Direct Hardwood Flooring and Supplies, LLC.
Shopping Cart: 1 item(s) Total: $0
log in
Free Shipping on all FLOORING orders over $2,000
Same day shipping - No Tax - Lowest prices - Order Today!
Home > Accessories > Finishes > DuraSeal

DuraSeal Penetrating Wood Finish - Stain
DuraSeal Penetrating Wood Finish - Stain
DuraSeal Penetrating Wood Finish - Stain
Item Id: 61
review 0 Review(s)
Review this item Review this item
Your Price:
$27.75
Availability:
Ships same Business Day
Choose Product Options
Color
Quantity
Email a friend Email a friend
Description
DURA SEAL_ Penetrating Finish is a semi-transparent stain formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Available in colors to match any decor, DURA SEAL_ Penetrating Finish creates a bond with the wood that won't scratch or wear away. Can be used with or without a finish coat. DIRECTIONS: Surface Preparation: 1. Properly prepare surface according to NOFMA or NWFA approved methods. 2. Use a No. 100 grit screen [80 grit for 201 White] for the final sanding cut. 3. Remove all dust with a broom and/or vacuum and tack surface with a clean towel moistened with mineral spirits. Application: 1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on a small inconspicuous area before proceeding with entire job. If desired, DURA SEAL_ Penetrating Finish #210 Neutral can be used to lighten any standard Penetrating Finish color. 2. Apply the first coat of DURA SEAL_ Penetrating Finish liberally with a brush, lambs wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon. 3. Allow to penetrate for 5 - 8 minutes then remove excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time. 4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above]. NOTE: A second coat of DURA SEAL_ Penetrating Finish is not recommended with 350 VO.C. compliant material. 5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice.
Recently Viewed Items

Questions
Find Floor Installers
Shipping Information
Site Map
Truckloads
Policies
Materials
Finishes
Abrasives
Prefinished Hardwood Flooring
Unfinished Hardwood Flooring
Bamboo Flooring
Vinyl Flooring
Commercial Flooring
Blowout Specials
Coupons
Our Brands
Mullican Flooring
Mannington Flooring
LW Mountain Flooring
Nova Flooring
Hawa Bamboo
Bona Finishes/Abrasives
DuraSeal Finishes/Stains
Norton Abrasives
About Direct Hardwoods
About
Careers
Testimonials
Terms and Policies
Affiliate Program
Privacy Policy
Contact Us
Facebook
Twitter
Mailing List